WS0341BL4US Wireless Weather Station FAQ

If the wireless signal indicator shows “--”, which means that lose the connection or wireless interference.

Way 1:

1. 1. Remove the batteries of sensor.
2. 2. Press and hold the “CH/▲” button for 3–4s, then reload the sensor battery.

Notes: If the re-connection succeeds, but it breaks again after a period of time, please place the outdoor sensor at new location no more than 330 feet (100 meters, open air) from the weather station.

Way 2: Factory Restart.

1. 1. Remove all the batteries of sensor and main unit.
2. 2. Power on the main unit and set main unit’s channel to CH1.
3. 3. Set the outdoor sensor channel to CH1.
4. 4. Then power on the sensor.
5. 5. Place the main unit and outdoor sensor at the same position for half an hour or more after powering on to establish a strong connection.

It means that you have entered Circular Channel Mode. Please refer to 14th page to turn to Single Channel Mode.

Make sure both unit are placed out of direct sunlight and away from any heat sources or vents. Please turn to 10th page to get more details to correct it.

This weather station has 5 forecast icons that predict the weather condition of the next 12-hours based on the change of temperature, humidity. It is not the real-time weather.

Main unit and sensor transmits range up to 328ft/100m without obstruction. You are near the sensor to connect the main unit. Avoid thick walls between the units or or strong interference source using same signal frequency (433ghz). (such as tvs, microwaves, computers, etc).